Table of Contents
Advertisement
Setting the electronic shutter
Changing the shutter speed
and mode selection range
On the SHUTTER SPEED screen of CAM MENU, the
setting range of the shutter speed can be restricted to
the required range and whether or not to use the
special operation mode (SYNCHRO SCAN) can be
selected.
1
Perform the menu operations (pages 70 to 72),
and display the "SHUTTER SPEED" screen.
n
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
3
Press the JOG dial button to set the item to be
changed.
Turn the JOG dial button to select ON or OFF, and
press the button to enter the setting.
4
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit's current statuses appears at the
top and bottom of the viewfinder screen.
<Notes>
O When operating the unit from the AJ-EC3 extension
control unit (optional accessory), the shutter speed
selected by the AJ-EC3 switch will take precedence
in determining the actual shutter speed even when
operations have been performed on the unit's
SHUTTER SPEED screen.
O For details on selecting the engineer mode and
display screens, refer to "Menu operations" (pages
70 to 72).
Setting the synchro scan mode
1
Press the SHUTTER switch from ON to SEL and
set to SYNCHRO SCAN.
2
In the SYNCHRO SCAN mode, continuous
switching inside the 60.0 Hz to 251.3 Hz range can
be achieved by pressing the SYNCHRO ("+" and
"–") buttons.
53
SHUTTER switch
Advertisement
Table of Contents
