Table of Contents
Advertisement
Viewfinder lamp displays
Setting the
lamp displays
Select the items targeted for the
the "!LED" screen of the CAM MAIN MENU 2 screen.
(Under the factory settings, the "!LED" screen is not
displayed.)
To perform operations on the "!LED" screen, either
switch the unit to the engineer mode menu or select
the "!LED" screen on the CAM USER MENU SELECT
2 screen under the CAM MAIN MENU 4 screen.
<Note>
For details on selecting the engineer mode menu and
display screens, refer to "Menu operations" (pages 70
to 72).
1
Perform the menu operations (pages 70 to 72) to
open the "!LED" screen.
n
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
3
For the selected item, press the JOG dial button,
and set whether or not the item is to be displayed
on the viewfinder screen.
Turn the JOG dial button, select display (ON) or no
display (OFF) and press the JOG dial button to
enter the selection.
4
2
Repeat steps
and
other items.
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit's current statuses appears at the
top and bottom of the viewfinder screen.
lamp display on
3
to set ON or OFF for the
Setting item
Lamp display appears when the gain is
GAIN 0 dB
set to a value other than "0 dB."
Lamp display appears when the gain is
GAIN –3 dB
set to a value other than "–3 dB."
SHUTTER
Lamp display appears when the
SHUTTER switch is at ON.
WHITE PRESET
Lamp display appears when "PRST"
applies to the channel in the white
balance memory.
EXTENDER
Lamp display appears when the lens
extender is used.
FILTER
Lamp display appears when the filter is
set to a value other than "3200 K."
BLACK STR
Lamp display appears when the black
stretch is at ON.
D4300 K
Lamp display appears when the white
balance presetting is 4300 K.
MATRIX
Lamp display appears when the matrix is
at ON.
COLOR CORECTION
Lamp display appears when the color
correction is at ON.
39
Description of setting
Advertisement
Table of Contents
