Table of Contents
Advertisement
Viewfinder screen status displays
Selecting the display items
The items to be displayed on the viewfinder screen
can each be set to ON or OFF on the "VF
INDICATOR" screen of the CAM MENU or on the
"VTR VF INDICATOR" screen of the VTR MENU.
Selectable items
On the "VF INDICATOR" screen of CAM MENU
O Extender display (EXTENDER)
O Shutter speed/mode display (SHUTTER)
O Filter display (FILTER)
O White balance memory display (WHITE)
O Gain display (GAIN)
O Aperture value and super iris ON display (IRIS)
O Camera ID display (CAMERA ID)
O Zoom position display (ZOOM LVL)
O Color temperature display (COLOR TEMP)
<Note>
The camera ID appears when color bar signals are
to
be
recorded
OUTPUT/AUTO KNEE switch setting.
For details, refer to "Setting the camera ID" (page
44).
n
On the "VTR VF INDICATOR" screen of VTR MENU
O Remaining tape display (TAPE)
O Remaining battery charge display (BATTERY)
O Level meter display (LEVEL METER)
O Time code display (TC)
O VTR warning display (VTR WARNING)
O SAVE lamp display (SAVE LED)
n
in
accordance
with
Selecting the display items
1
Perform the menu operations (pages 70 to 72) to
open the "VF INDICATOR" screen.
n
n
the
2
Turn the JOG dial button to move the arrow
(cursor) to the desired item.
3
For the selected item, press the JOG dial button,
and set whether or not the item is to be displayed
on the viewfinder screen.
Turn the JOG dial button to select display (ON) or
no display (OFF), and press the JOG dial button to
enter the selection.
4
Repeat steps
items.
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the display
showing the unit's current statuses appears at the
top and bottom of the viewfinder screen.
42
2
3
and
to set ON or OFF for other
Advertisement
Table of Contents
