Table of Contents
Advertisement
Setting menu screens
VTR VF INDICATOR screen
The information to be displayed in the viewfinder is set
on this screen.
Variable
Item
range
display
TAPE (IND)
ON
USER
OFF
ENG
BATTERY (IND)
ON
USER
OFF
ENG
LEVEL METER
CH1
USER
(IND)
CH1•CH2
ENG
OFF
AUDIO IN (IND)
ON
USER
OFF
ENG
TC (IND)
ON
USER
OFF
ENG
VTR WARNING
ALWAYS
USER
(IND)
NORMAL
ENG
OFF
The underlining in the variable range column indicates the setting in the preset mode.
(VTR MAIN MENU)
VF
Remarks
For switching the
remaining tape display to
ON or OFF.
For switching the battery
voltage display to ON or
OFF.
For selecting what the
audio level meter is to
display.
CH1:
The level of the CH1
signals only is displayed.
CH1•CH2:
The levels of both the
CH1 and CH2 signals
are displayed.
CH2:
The level of the CH2
signals only is displayed.
OFF: No display.
For switching the audio
input display to ON or
OFF.
ON : The audio input is
displayed.
OFF : The audio input is
not displayed.
For switching the time
code display to ON or
OFF.
ON : The time code is
displayed.
OFF : The time code is not
displayed.
For setting when the
VTR's warnings are to be
displayed.
ALWAYS:
The warning display
always appears when a
warning has occurred.
NORMAL:
The display appears for
3 seconds after the
warning occurred and for
3 seconds after
recording was started or
completed.
OFF:
The warning displays do
not appear.
Variable
Item
range
SAVE LED
SAVE&TAPE
SAVE
MIC/AUDIO screen
The MIC/AUDIO settings are performed on this
screen.
Variable
Item
range
FRONT MIC
ON
POWER
OFF
MIC LOWCUT
FRONT
CH1
REAR
F&R
OFF
<Note>
The frequency characteristics in the MIC LOWCUT ON mode are
200 Hz to 10 kHz.
98
VF
Remarks
display
USER
For setting the operation
ENG
of the SAVE lamp.
SAVE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
SAVE&TAPE:
This lights when the VTR
SAVE/STBY switch has
been set to SAVE.
It goes off during
recording.
When the tape is
approaching its end, it
flashes in tandem with
the warning alarm that
sounds when tape-end is
approaching.
VF
Remarks
display
USER
ON : The phantom power
ENG
is supplied to the
front microphone.
OFF : The phantom power
is not supplied to the
front microphone.
USER
For setting the high-pass
ENG
filter for the CH1 mic input.
FRONT: The high-pass filter
for the front mic
input is set to ON.
REAR : The high-pass filter
for the rear mic
input is set to ON.
F&R
: The high-pass
filters for both the
front and rear mic
inputs are set to
ON.
OFF
: The high-pass filter
for the CH1 input
is set to OFF.
Advertisement
Table of Contents
