Rear-Wheel Stand - BMW HP4 Rider's Manual

Rear-wheel stand

9
Installing rear-wheel
stand
152
z
Use basic stand with tool num-
ber (83 30 0 402 241) and ad-
apters (83 30 2 152 839).
Install adapter pins (83 30 2
152 841) 1 in the rear wheel
swinging arm on left and right
and tighten to the specified
torque.
Swinging-arm adapter to
rear wheel swinging arm
20 Nm
Turn brackets 2 long ends out.
Adjust adapters 3 to the width
of the pins inserted in the rear
wheel swinging arm.
Set the height of the rear-
wheel stand to raise the rear
wheel slightly clear of the
ground.