BMW HP4 Rider's Manual page 38

Alarm signal
4
36
The alarm signal continues for
z
26 seconds. The system is act-
ive again another 12 seconds
later. You can interrupt an alarm
signal at any time by pressing
button 1 on the remote control.
This function does not change
the status of the anti-theft alarm.
While an alarm is in progress an
acoustic alarm signal sounds and
the turn indicators flash. You can
program the type of alarm signal.
Deactivation
with anti-theft alarm (DWA)
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm (DWA) is deac-
tivated.
DWA adjusting
with anti-theft alarm (DWA)
Switching on ignition (
OE
Repeatedly short-press
SET 2 until
ENTER
3 appears on the
display.
OE
If you scroll down too far,
repeatedly short-press
34).
SET 2 until the menu returns to
the start and then to the reading
you want.
Long-press SET 2 to open the
menu.
SETUP MENU