Multifunction Display - BMW HP4 Rider's Manual

Multifunction display

6
Selecting the display
mode
76
Repeatedly press button 2 until
the reading shows the mode
z
you want.
ROAD mode: The ROAD mode
provides you with all the informa-
tion necessary for riding on pub-
lic roads. All the descriptions not
included in this section apply to
this mode.
LAPTIMER mode: In LAP-
TIMER mode you can save lap
times and other data for sub-
sequent viewing in the INFO
mode.
INFO mode: The data saved
beforehand in LAPTIMER mode
can be viewed in INFO mode.
Note that this mode can be activ-
ated only when the motorcycle is
at a standstill.
SETUP mode: SETUP mode
is for customising damping and
the way in which the instrument
panel works in line with individual
preferences. Note that this mode
can be activated only when the
motorcycle is at a standstill.
Speed warning: You can set a
speed above which a warning is
issued. This function has to be
SETUP
switched on in
When the display shows
INFO-MENU
the
SETUP-MENU
press and hold down button 2
to activate the mode.
mode.
or the
, as applicable,