BMW HP4 Rider's Manual page 159

Insert socket 3 into the head-
light housing, making sure that
retainer 2 engages.
Install the cover.
Replacing bulbs for front
and rear turn indicators
The LED turn indicators can
be replaced only as a complete
unit. Consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
LED rear light
If the number of LEDs in the rear
light that have failed exceeds the
number stated in the Technical
Data below, the rear light must
be replaced. Under these cir-
cumstances:
Seek the advice of a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Maximum number of de-
fective LEDs in rear-light
unit
1
Replacing number-plate
light
Pull number-plate light bulb 1
out of the light housing.
Remove the bulb from the
socket.
9
157
z