BMW HP4 Rider's Manual page 164

with anti-theft alarm (DWA)
9
162
Connect battery positive lead 2
first.
Then install battery negative
z
lead 1.
Installing front seat (
Recharge the battery
Disconnecting battery from
motorcycle (
Charge the battery using a
suitable charger.
Comply with the operating in-
structions of the charger.
Once the battery is fully
charged, disconnect the
OE
charger's terminal clips from
the battery terminals.
in the course of a lengthy period
of disuse. See the instructions
for caring for your battery. Al-
ways fully recharge the battery
before restoring it to use.
Connecting battery to motor-
cycle (
Remove the battery
Disconnecting battery from
motorcycle (
57).
Lift the battery up and out;
work it slightly back and forth
if it is difficult to remove.
160).
Installing battery
for a prolonged period of time
it will be necessary to enter the
current date in the instrument
panel, in order to ensure that the
The battery has to be re-
charged at regular intervals
161).
160).
If the battery was discon-
nected from the motorcycle
service-due indicator functions
correctly.
If you want to have the date
set consult a specialist work-
shop, preferably an authorised
BMW Motorrad dealer.
Place the battery in the battery
compartment, positive terminal
on the right in the forward dir-
ection of travel.
Connecting battery to motor-
cycle ( 161).
Setting the clock ( 37).