BMW HP4 Rider's Manual page 49

Throttle twistgrip in fully closed
position.
Clutch pulled.
Once the new ride mode has
been activated, the selection
menu disappears from the
display.
The mode selected in this way
is retained with the engine-
characteristic, ABS, DTC and
DDC adaptation settings even
after the ignition has been
switched off.
In SLICK mode, the current DTC
fine-tuning settings are also
shown 5.
DTC Adapting ( 98).
Installing coding plug
Switch off the ignition.
with reduced power output,
OE
79 kW
The following applies to
motorcycles with power
reduction: Once the coding plug
has been inserted, the choice of
riding modes includes SPORT
and RACE with increased engine
power.
Adapt your style of riding accord-
ingly to allow for the markedly
more sporty handling and per-
formance with considerably more
engine power.
It is important for the rider in-
tending to use these more sporty
ride modes to familiarise himself/
herself with their characteristics.
The following applies to
motorcycles with power
reduction: Inserting the cod-
ing plug voids homologation for
riding the motorcycle on public
roads.
Do not use the coding plug for
riding these vehicles on public
roads.
Switch off the ignition.
Remove the front seat (
Dirt and moisture can pen-
etrate the open plug and
lead to malfunctions.
Reinstall the cap after removing
the coding plug.
Open cable tie and remove cap
from plug connection 1.
4
47
57).
z