Removing And Installing Front Turn; Front Turn Indicators; Indicators - BMW HP4 Rider's Manual

6
110
From the front, work the anti-
theft alarm into position in the
holder.
Install screw 4.
Connect the plug, making sure
that retainers 3 engage.
z
with Passenger Bundle
Installing rear seat (
Removing and installing

front turn indicators

Removing front flashing
turn indicator
The procedure described
here for the right side apply
applies by analogy to the left side
panel.
Remove the side panel
( 137).
OE
56).
Unclip the turn-signal cable at
position 1.
Remove screw 2 and remove
the turn indicator. Work the
cable through the fairing side
panel.
Protect the plug on the motor-
cycle to prevent the ingress of
foreign matter.