Care Products; Washing The Vehicle; Cleaning Easily Damaged Compon; Components - BMW HP4 Rider's Manual

Care products

10
BMW Motorrad recommends
that you use the cleaning
164
and care products you can
obtain from your authorised
BMW Motorrad dealer.
The substances in BMW
CareProducts have been tested
in laboratories and in practice;
z
they provide optimised care and
protection for the materials used
in your vehicle.
The use of unsuitable
cleaning and care products
can damage vehicle components.
Do not use solvents such as cel-
lulose thinners, cold cleaners,
fuel or the like, and do not use
cleaning products that contain
alcohol.

Washing the vehicle

BMW Motorrad recommends
that you use BMW insect re-
mover to soften and wash off
insects and stubborn dirt on
painted parts prior to washing
the vehicle.
To prevent stains, do not wash
the vehicle immediately after it
has been exposed to strong sun-
light and do not wash it in the
sun.
Make sure that the vehicle is
washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
After the motorcycle has
been washed, ridden
through water or ridden in
the rain, the brake discs and
pads might be wet and the
brakes might not take effect
immediately.
Apply the brakes in good time
until the brake discs and brake
pads have dried out.
Warm water intensifies the
effect of salt.
Use only cold water to wash off
road salt.
The high pressure of high-
pressure cleaners (steam
cleaners) can damage seals, the
hydraulic brake system, the elec-
trical system, and the seat.
Exercise restraint when using a
steam jet or high-pressure clean-
ing equipment.
Cleaning easily
damaged components
Plastics
The use of unsuitable
products to clean plastic
parts can damage the surface.
Do not use cleaning agents that