BMW HP4 Rider's Manual page 48

4
46
Arrow 1 and selection menu 2
are displayed. The current set-
ting is shown at position 3.
z
If the coding plug has been in-
serted, the menu includes the
SLICK
mode 4 as an extra se-
lectable item.
Installing coding plug (
The SLICK mode is set up
for racing slicks and the as-
sumption on which the parameter
settings are based is that tyre-
to-surface grip is of the very high
level generally encountered only
on race tracks.
Activate SLICK mode only on
race tracks and only when run-
ning the motorcycle on racing
slicks.
In RACE and in SLICK
mode, there is an increased
risk of rollover because the rear
47).
wheel lift-off protection system
is switched off. In SLICK mode,
there is an additional risk of ac-
cident because ABS control at
the rear wheel is switched off
when only the footbrake lever is
pressed.
When braking sharply, be pre-
pared for the rear wheel lifting off
the ground.
Repeatedly press button 1 until
the arrow is to the left of the
setting you want.
With the motorcycle at a stand-
still, the mode you select is
activated immediately.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Brake not applied.