Table of Contents
Advertisement
Control functions
1. Engine stop switch "
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
"LIGHTS"
Push the headlight beam switch to change the
headlight to high beam "HI" or to low beam
"LO".
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU12654
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
20
"
1
1. Grip warmer adjusting switch
1. Thumb warmer adjusting switch
To raise the temperature
To raise the temperature, press the respec-
tive switch to "HI".
To lower the temperature
To lower the temperature, press the respec-
tive switch to "LO".
See "Fuel meter and grip/thumb warmer level
indicator" on page 16 for detailed information.
ESU10696
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
TIP
The auxiliary DC jack can only be used if the
engine is running.
To use the auxiliary DC jack
1.
Start the engine.
Advertisement
Table of Contents
