Yamaha RX10PB Owner's Manual page 83

5. Remove the screws, and then remove
the headlight access panel.
1
1. Screw
1. Screw
2. Headlight access panel
6. Disconnect the headlight coupler.
7. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
8. Unhook the bulb holder, and then remove
the burnt-out bulb.
Periodic maintenance and adjustment
1
1
1. Bulb holder
9. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
2
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
10. Install the bulb holder cover, and then
2
connect the headlight coupler.
11. Install the headlight access panel.
12. Connect the headlight unit couplers, and
then install the plastic band.
13. Install the headlight unit, making sure to
fit the slots on its bottom over the projec-
tions on its stay.
1
[ECS00621]
77