Engine Stop Switch; Headlight Beam Switch "Lights; Grip/Thumb Warmer Adjustment Switch - Yamaha VK10A Owner's Manual

error code, and then have a Yamaha dealer
inspect the snowmobile as soon as possible.
NOTICE: Do not continue to operate the
engine longer than necessary if there is an
error code to avoid possible engine dam-
age.
[ECS00820]
1. Warning light "
2. Self-diagnosis warning indicator "
3. Error code display
ESU10531

Engine stop switch " "

The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See page 29 for engine starting
procedures.)
1. Engine stop switch "
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
"
"
"
Control functions
ESU10661
Headlight beam switch
"LIGHTS"
Push the headlight beam switch to change the
headlight to high beam "HI" or to low beam
"LO".

1. Headlight beam switch "LIGHTS"

2. High beam "HI"
3. Low beam "LO"
ESU12651
Grip/thumb warmer adjustment
switch
The grip warmer adjustment switch and the
thumb warmer adjustment switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
1. Grip warmer adjustment switch
15