Engine Stop Switch; Headlight Beam Switch "Lights; Grip/Thumb Warmer Adjustment Switch - Yamaha FX Nytro FX10X Owner's Manual

1. Warning light "
2. Self-diagnosis warning indicator "
3. Two-digit error code
EWS00650
WARNING
If the self-diagnosis warning indicator and
warning light flash continuously, and an
error code is displayed during operation,
there may be some problem with an elec-
trical circuit, couplers, etc.
Note the error code, and then have a
Yamaha dealer inspect the snowmobile as
soon as possible in order to avoid engine
damage.
ESU10530

Engine stop switch " "

The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See pages 31 for engine starting
procedures.)
"
"
Control functions
1. Engine stop switch"
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
"LIGHTS"
Push the headlight beam switch to change the
headlight to high beam "HI" or to low beam
"LO".

1. Headlight beam switch "LIGHTS"

2. High beam "HI"
3. Low beam "LO"
ESU10670
Grip/thumb warmer adjustment
switch
The grip/thumb warmer adjustment switch
controls the electrically heated handlebar
grips and throttle lever.
"
15