Connection To The Drainage System; Connecting The Drain Hose - Miele DGD 4635 Operating And Installation Instructions

Connection to the drainage
system

Incorrect installation can result in
personal injury and damage to prop‐
erty.
To avoid burns from hot, rising
steam, the drain hose must not be
connected to a dishwasher drainage
connection (see "Building-in dimen‐
sions" - position  in the diagrams).
The drainage siphon must not be lo‐
cated higher than the drain hose
connection point on the appliance.
This is to ensure that water can drain
out completely after a programme.
The top end of the drain hose must
not be higher than 500 mm where it
connects to the siphon.
The drain hose supplied must not be
shortened.
The drain hose should be connected to
a siphon with a fixed hose connection
point or to the siphon on the sink drain
pipe.
The temperature of the drainage water
is approx. 80–90 °C.
Only genuine original Miele hoses can
be used with this appliance.
Plumbing in the appliance

Connecting the drain hose

 Connect the drain hose to the sepa‐
rate siphon using the hose sleeve
(Ø 21 mm) (see "Building-in dimen‐
sions" - position  in the diagrams).
 Then secure the hose with the hose
clip.
99