Miele DGD 4635 Operating And Installation Instructions page 84

Pressure steam oven
Table of Contents

Advertisement

Problem solving guide
Problem

 





84
Possible cause and remedy
The temperature in the oven compartment is too high
because the steam oven has not cooled down suffi‐
ciently during the cooling down phase. The quantity
of food was too large. Cooking large quantities of
food affects the cooling down phase.
The tap is not turned on completely.
 Turn on the tap completely and start the pro‐
gramme again.
The water nozzle on the rear wall of the oven com‐
partment needs descaling.
 Proceed as described in "Cleaning and care - Wa‐
ter nozzle".
Too little water is getting into the steam generator.
 Switch the steam oven off and then back on
again.
 If the fault message appears again, switch the ap‐
pliance off and contact Miele.
The overheating protection mechanism has been acti‐
vated.
 Proceed as described in "Safety features - Over‐
heating protection".
The power supply was interrupted during a pro‐
gramme.
 Check the food and, if necessary, set a new cook‐
ing duration and then press the Start/Stop button
to start the programme again.
There is a fault in the self-checking of the electronics.
 Switch the appliance off and call Miele.
The temperature regulator is faulty and the tempera‐
ture in the oven compartment has risen above
125 °C. The programme is interrupted and the cooling
down phase will run.
 Switch the appliance off after the cooling down
phase and contact Miele.
The appliance cannot be switched off.
 Call Miele.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgd 6605Dgd 6635

Table of Contents