Table of Contents
Advertisement
DGD 6605 / DGD 6635 in a 450 mm high niche
a Cut-out in housing unit for feeding
water inlet and drain hoses through
b Isolator switch position 250 x 80 mm
(Important: Do not position behind
the appliance)
c Tap (cold water connection)
d Water inlet hose
e Separate siphon
* Appliances with a glass front / ** Appliances with a metal front
Building-in dimensions
f Do not connect the drain hose at this
position (see "Plumbing in the appli‐
ance - Connection to the drainage
system")
g Drain hose
h Important: The top end of the drain
hose must not be higher than 500
mm where it connects to the siphon.
i Filler panel AB 45-7 L
95
Hide quick links:
Advertisement
Table of Contents
