Miele DGD 4635 Operating And Installation Instructions page 75

Removing the shelf runners
 Loosen the fixing screws  far
enough to be able to pull the runners
forwards and out.
They cannot be unscrewed com‐
pletely!
Refitting the shelf runners
 Fit the shelf runners with the guide 
(centre front) over the loose fixing
screw.
 Fit the eyelet (at the rear of the mid‐
dle runner) over the pin  in the rear
wall of the oven compartment.
 Tighten the screws  back up.
Cleaning and care
In the case of the right-hand side
shelf runner, ensure that the water
nozzle is aligned so that its step is
on the left-hand side, and that the
step is aligned vertically with the
back of the shelf runners (see
"Cleaning and care – Water nozzle").
75