DGD 4635 in a 450 mm high niche
a Cut-out in housing unit for feeding
water inlet and drain hoses through
b Electrical socket position
Connection cable L = 2000 mm
c Tap (cold water connection)
d Water inlet hose
e Separate siphon
* Glass front / ** Metal front
Building-in dimensions
f Do not connect the drain hose at this
position (see "Plumbing in the appli‐
ance - Connection to the drainage
system")
h Important: The top end of the drain
hose must not be higher than 500
mm where it connects to the siphon.
g Drain hose
i Filler panel AB 45-7
93