Ignition Switch; Backlap Switch - Toro 04530 Operator's Manual

Ignition Switch

Insert the key into the switch (Figure 19) and turn it clockwise
as far as possible to the Start position to start the engine.
Release the key as soon as the engine starts; the key will move
to the On position. Turn the key counterclockwise to the Off
position to stop the engine.

Backlap Switch

The backlap switch is located under the plastic cover to
the left of the seat. Use the backlap switch (Figure 20) in
conjunction with the raise/lower mow control lever and the
reel speed control for backlapping the reels.
1
Figure 20
1. Backlap switch—backlap
position
2
G017943
2. Backlap switch—mow
position
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the generator status, the speed, and various
diagnostics and other information about the machine and the
battery pack. Figure 21 and Figure 22 illustrate the splash
screen and main information screen of the InfoCenter. You
can switch between the splash screen and main information
screen at any time by pressing any of the InfoCenter buttons
and then selecting the appropriate directional arrow.
2
1
9
1. Battery voltage
2. Power light/fault indicator
3. Engine RPM/status
4. Fault log
5. Generator voltage/status
1
1. Functional control status
•
Engine rpm/status—indicates the engine rpm.
•
Fault log—indicates that there is a current fault log to
review.
•
Generator voltage/status—indicates the generator
voltage.
20
3
4
52.2V
STOP
n/min
13.2
10,000.0
G017973
7
8
Figure 21
6. Hour meter
7. Right button
8. Down button
9. Menu access/back button
1200 52.2V
n/min
1600
10,000.0
n/min
G017974
Figure 22
2. PTO speed
5
6
2