Initial Setting Level - Omron E5AZ User Manual

Initial Setting Level

5-5 Initial Setting Level
94
This level is for setting up the basic specifications of the E5AZ/E5EZ. In this
level, you can set the "input type" parameter for selecting the sensor input to
be connected to the E5AZ/E5EZ, limit the setting range of set points or set the
alarm mode.
Press
1 second
or longer
Initial Setting
To move from the operation level to the initial setting level, press
three seconds or more.
• The initial setting level is not displayed when "initial setting/communica-
tions protect" is set to "2". This initial setting level can be used when "initial
setting/communications protect" is set to "0" or "1".
• The "scaling upper limit", "scaling lower limit" and "decimal point" parame-
ters are displayed when analog input is selected as the input type.
Power ON
Operation
Level
Press Key
Press C 25
first display flicker
3 seconds
100
or longer
Control stopped
Control in progress
Level
Control stopped
Section 5-5
key for