Moving To The Advanced Function Setting Level - Omron E5AZ User Manual

Moving to the Advanced Function Setting Level

4-8

Moving to the Advanced Function Setting Level

1,2,3...
Protect level
"operation/
oapt
adjustment
protect"
0
"initial setting/
icpt
communications
protect"
1
icpt
0
Operation level
PV/SP
C
25
100
Initial setting level
Input type
in-t
5
Move to advanced
amoV
function setting
level
-169
Advanced function
setting level
init
off
In the default setting, the advanced function setting level is protected and you
cannot move to this setting level. To move to this setting level, you must first
cancel the protection applied by the "protect level." See 4-9 Using the Key Pro-
tect Level.
1. Press the and
the "operation level."
Note The key pressing time can be changed in "Move to protect level
time" (advanced function setting level).
2. The controller moves to the protect level, and "operation/adjustment pro-
tect" is displayed.
3. Press the key once to move to "initial setting/communications protect."
4. Set the set value to "0"
5. Press the and
el."
6. Press the key for at least three seconds to move to the "initial setting
level" from the "operation level."
7. Select the "Move to advanced function setting level" parameter by pressing
the key.
8. Press the or
the key or leave the setting for at least two seconds to move to the "ad-
vanced function setting level" from the "initial setting level."
keys simultaneously for at least three seconds in
keys simultaneously to return to the "operation lev-
key to enter the password (" − 169"), and either press
Section 4-8
71