Figure 1-1 Networking Diagram For Configuring Port Security Protection - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet
to enable the sticky MAC function on the port connected to PCs of employees and set the
maximum number of MAC addresses learned by the port to the number of trusted PCs.

Figure 1-1 Networking diagram for configuring port security protection

Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Configure port security protection on the port connected to PCs of employees.
# Enable port security protection.
<Quidway> system-view
[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] port-security enable
# Set the protection mode on the port.
Issue 03 (2009-08-20)
S9300
GE1/0/1
GE1/0/1
E1/0/1 E1/0/3
PC1 PC2
Enable port security protection on the port connected to PCs of employees.
Set the protection mode on the port.
Set the maximum number of MAC addresses that the port can learn.
Enable the sticky MAC function on the port.
Number of the port connected to PCs of employees
Protection mode on the port
Maximum number of MAC addresses that the port can learn
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PC3
1 Ethernet Interface Configuration
1-15