Maintenance; Recommended Maintenance Schedule(S) - Toro Workman HD 07369 Operator's Manual

Utility vehicle with bed
Hide thumbs Also See for Workman HD 07369:
Table of Contents

Advertisement

Maintenance

Determine the left and right sides of the machine from the normal operating position.
CAUTION
Only qualified and authorized personnel should maintain, repair, adjust, or inspect the machine.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an open flame
to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open pans of fuel or flammable
cleaning fluids for cleaning parts.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Torque the front and rear wheel nuts.
• Check the adjustment of the shift cables.
• Check the adjustment of the parking brake.
• Check the condition and tension of the pump-drive belt.
• Replace the hydraulic filter.
• Inspect opening on filter.
• Change the engine oil and filter.
• Check engine oil level.
• Check the transaxle/hydraulic-fluid level. (Check the fluid level before the engine
is first started and every 8 hours or daily, thereafter.)
• Check the tire pressure.
• Check the brake-fluid level. (Check the level before the engine is first started and
every 8 hours or daily, thereafter.)
• Check the operation of the safety-interlock system.
• Clean and oil the air cleaner foam pre-cleaner. (Every 25 hours if operating
conditions are extremely dusty or sandy)
• Inspect the air cleaner paper element.
• Check the battery-fluid level (every 30 days if in storage).
• Check the battery-cable connections.
• Grease all bearings and bushings. (Lubricate more frequently in heavy duty
applications)
• Change the air cleaner paper element.
• Change the engine oil and filter.
• Inspect the condition of the tires.
• Remove the debris from the engine-cooling system (Clean more frequently in
dirty conditions).
32

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents