Input/Output Assign - Onkyo TX-NR5007 Instruction Manual

Advanced Setup—Continued

Input/Output Assign

This section explains items on the "Input/Output Assign" menu.
1 Press the [RECEIVER] button followed by
the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make sure the
appropriate external input is selected on your TV.
2
Use the Up and Down [q]/[w] buttons to
select "1. Input/Output Assign", and then
press [ENTER].
3 Use the Up and Down [q]/[w] buttons to
select the submenu, and then press
[ENTER].
Monitor Out
Monitor Out
Resolution
Brightness
With this setting you can adjust the picture brightness. "–50" is the darkest. "+50" is the brightest.
Contrast
With this setting you can adjust contrast. "–50" is the least. "+50" is the greatest.
Hue
With this setting you can adjust the red/green balance. "–20" is the strongest green. "+20" is the strongest red.
Saturation
With this setting you can adjust saturation. "–50" is the weakest color. "+50" is the strongest color.
Red Brightness
With this setting you can adjust the picture red brightness. "–50" is the darkest. "+50" is the brightest.
Red Contrast
With this setting you can adjust red contrast. "–50" is the least. "+50" is the greatest.
Green Brightness
With this setting you can adjust the picture green brightness. "–50" is the darkest. "+50" is the brightest.
Green Contrast
With this setting you can adjust green contrast. "–50" is the least. "+50" is the greatest.
Blue Brightness
With this setting you can adjust the picture blue brightness. "–50" is the darkest. "+50" is the brightest.
Blue Contrast
With this setting you can adjust blue contrast. "–50" is the least. "+50" is the greatest.
HDMI Input
See "HDMI Input Setup" on page 54.
See "Monitor Out Setup" on page 52.
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–20 to +20 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
–50 to +50 (default: 0)
4 Use the Up and Down [q]/[w] buttons to
select setting, and then use the Left and
Right [e]/[r] buttons to set them.
5 When you've finished, press the [SETUP]
button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
93