Onkyo TX-NR5007 Instruction Manual page 103

Onkyo av receiver instruction manual
Hide thumbs Also See for TX-NR5007:
Table of Contents

Advertisement

Advanced Setup—Continued
Theater-Dimensional
Listening Angle
With this setting, you can optimize the Theater-Dimen-
sional listening mode by specifying the angle of the front
left and right speakers relative to the listening position.
LFE Level
With these settings, you can set the level of the LFE (Low Frequency Effects) channel individually for Dolby Digital,
DTS, multichannel PCM, Dolby TrueHD, DTS-HD Master Audio, and DSD sources.
If you find that low-frequency effects are too loud when using one of these sources, change the setting to –20 dB or
–Q dB.
*1
Dolby Digital
, DTS
The level can be set to –Q dB, –20 dB, –10 dB, or 0 dB (default).
Notes:
*1 Sets the level of the LFE channel for Dolby Digital and Dolby Digital Plus sources.
*2 Sets the level of the LFE channel for DTS and DTS-HD High Resolution sources.
*3 Sets the level of the LFE channel for multichannel PCM sources. (Multichannel PCM is input via HDMI.)
*4 Sets the level of the LFE channel for Dolby TrueHD sources.
*5 Sets the level of the LFE channel for DTS-HD Master Audio sources.
*6 Sets the level of the LFE channel for DSD (Super Audio CD) sources.
Direct
Analog
Subwoofer
This setting determines whether or not analog audio signals (bass signals) are output from front speakers when
the Pure Audio or Direct listening mode is selected.
DSD
DAC Direct
This setting determines whether or not DSD (Super Audio CD) audio signals are passed through the DSP for
A/V Sync, delay, etc., processing when the Pure Audio or Direct listening mode is selected.
Note:
Once you have selected "Yes", only DAC Direct will be available for selection. "DSD Direct" will appear on
the display.
Wide: Select if the listening angle is greater than 30 degrees (default).
Narrow: Select if the listening angle is less than 30 degrees.
*2
*3
, Multich PCM
, Dolby TrueHD
Off: Analog audio signals (bass signals) are not output (default).
On: Analog audio signals (bass signals) are output.
Off: DSD signals are processed by the DSP (default).
On: DSD signals are not processed by the DSP.
Front left speaker
*4
, DTS-HD Master Audio
Front right speaker
Listening angle: 30°
*5
*6
, DSD
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx-nr3007

Table of Contents