Selecting The Language Used For The Onscreen Setup Menus - Onkyo TX-NR5007 Instruction Manual

First Time Setup—Continued
In this Instruction Manual, illustrations from the onscreen menu or explanations referring to the menu will be in the
same language as the Instruction Manual. The default Language setting for the onscreen menu is English. If your
Instruction Manual is in a language other than English, first follow the instructions below to change the Language.
Selecting the Language used for the
onscreen setup menus
This setting determines the language used for the
onscreen setup menus. You can select: English, German,
French, Spanish, Italian, Dutch, Swedish, or Chinese.
ENTER
SETUP
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [q]/[w] but-
tons to select "6. Miscella-
neous", and then press [ENTER].
The "Miscellaneous" menu appears.
50
RECEIVER
qwer
Menu
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3
Use the Up and Down [q]/[w] but-
tons to select "2. OSD Setup",
and then press [ENTER].
The "OSD Setup" menu appears.
6–2. OSD Setup
Immediate Display
Display Position
TV Format
Language
(European and Asian models)
4 Use the Up and Down [q]/[w] but-
tons to select "Language", and
then use the Left and Right [e]/
[r] buttons to select:
English, Deutsch, Français, Español,
Italiano, Nederlands, Svenska, 中文
5 Press the [SETUP] button.
The setup menu closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
On
Bottom
Auto
English