Using Easy Macros - Onkyo TX-NR5007 Instruction Manual

Basic Operations—Continued

Using Easy Macros

Using the Easy macro command in the Easy macro
mode, you can sequentially operate Onkyo components
with simple commands by simply pressing one button.
These commands are user-specifiable (see page 150) and
the default actions are described below. Press the
ACTIVITIES buttons to start the Easy macro command.
Once the AV receiver has entered the normal macro
mode, all of the ACTIVITIES buttons will automatically
switch to the normal macro mode. In this case, pressing
the [ALL OFF] button will set only the AV receiver to
Standby mode.
1 Press the [MY MOVIE], [MY TV],
or [MY MUSIC] button.
MY MOVIE (default):
1. The TV connected to the AV
receiver is turned on.
2. The Onkyo DVD player con-
nected to the AV receiver is turned
on.
3. The AV receiver is turned on.
4. The input selector of the AV
receiver is set to "DVD/BD".
5. The player starts playback.
MY TV (default):
1. The TV connected to the AV
receiver is turned on.
2. The cable set-top box connected to
the AV receiver is turned on.
3. The AV receiver is turned on.
4. The input selector of the AV
receiver is set to "CBL/SAT". You
can enjoy cable TV.
ACTIVITIES
buttons
ALL OFF,
MY MOVIE,
MY TV,
MY MUSIC
RECEIVER
AUDIO
*1
MY MUSIC (default):
1. The Onkyo CD player connected
to the AV receiver is turned on.
2. The AV receiver is turned on.
3. The input selector of the AV
receiver is set to "CD".
4. The player starts playback.
Note:
Once you start the Easy macro com-
mand, you cannot use other ACTIVI-
TIES buttons during the execution. If
you want to operate other components
halfway, press the [ALL OFF] to stop
and press desired ACTIVITIES button.
2
Press the [ALL OFF] button.
1. The connected component stops
and turns off.
2. The AV receiver turns off.
3. The TV connected to the AV
receiver turns off (Standby).
*1. Depending on the start-up time of the DVD/BD player, the AV
receiver may not activate this playback command. In this case,
press the Play [1] button on the remote controller.
*2. When [MY MUSIC] is selected, with the default settings, this
will not be performed.
*3. With some televisions, the power may not be turned off (or enter
standby).
*2*3
71