Onkyo TX-NR5007 Instruction Manual page 13

Front & Rear Panels—Continued
y DVD/BD IN
Here you can connect a DVD/BD player. Input
jacks include S-Video, composite video, and analog
audio. You can connect a DVD/BD player's 2-chan-
nel analog audio output.
z MULTI CH input: FRONT L/R, CENTER,
SUBWOOFER, SURR L/R, and SURR BACK
L/R
This analog multichannel input is for connecting a
component with a 5.1/7.1-channel analog audio out-
put, such as a DVD player, DVD-Audio or Super
Audio CD-capable player, or an MPEG decoder.
A PRE OUT: FRONT L/R, CENTER, SURR L/R,
SURR BACK L/R, and FRONT HIGH/WIDE
L/R
These multichannel analog audio outputs can be
connected to the analog audio input on a multichan-
nel power amplifier for when you want to use the
AV receiver solely as a preamplifier.
PRE OUT: SW1, SW2
These analog audio outputs can be connected to a
powered subwoofer. You can connect the powered
subwoofer with each jacks respectively. Level and
distance can be set individually for each output.
B PRE OUT: ZONE 2, ZONE 3 L/R
These analog audio outputs can be connected to the
line inputs on amplifiers in Zone 2 and Zone 3.
C FRONT L/R, CENTER, SURR L/R, SURR
BACK/ZONE 3 L/R, FRONT HIGH L/R, and
FRONT WIDE/ZONE 2 L/R
These terminal posts are for connecting the front
L/R, center, surround L/R, surround back/zone 3
L/R, front high L/R, and front wide/zone 2 L/R
speakers.
The FRONT L/R and SURR BACK/ZONE 3 L/R
terminal posts can be used with front speakers A
and surround back speakers respectively, or used to
bi-amp or bridge the front speakers A. See "Bi-amp-
ing the Front Speakers A" on page 23 and "Bridging
the Front Speakers A" on page 24.
The FRONT WIDE/ZONE 2 L/R and SURR
BACK/ZONE 3 L/R terminal posts can be used
with front speakers B and surround back speakers
respectively, or used to biamp or bridge the front
speakers B. See "Bi-amping the Front Speakers B"
on page 25 and "Bridging the Front Speakers B" on
page 26.
The FRONT WIDE/ZONE 2 L/R terminals can be
used with front wide speakers respectively, or used
to connect the speakers in Zone 2.
See "Connecting Zone 2" on page 131.
The SURR BACK/ZONE 3 L/R terminals can be
used with surround speakers respectively, or used to
connect the speakers in Zone 3.
See "Connecting Zone 3" on page 133.
D SIRIUS antenna
(North American models)
This jack is for connecting a SIRIUS Satellite Radio
antenna, sold separately (see the separate SIRIUS
instructions).
See pages 18 to 47 for connection information.
13