Tv Out; Osd Language; Impose Osd; Screen Saver - Onkyo TX-NR545 Manual

Advanced Settings (Setup Menu)
1. Input/Output Assign
TV Out
Make settings for the on­screen display function on the TV when you use the
setting menu, for example.
OSD Language
Default Value: English
Select the on­screen display language.
Select from English, German, French, Spanish, Italian, Dutch, Swedish,
Russian (European, Australian and Asian models), or Chinese
(European, Australian, Taiwanese and Asian models).
Impose OSD
Default Value: On
Set whether or not to display the information on the TV when the
volume is adjusted or input is changed, for example.
"On": OSD will be displayed on the TV.
"Off": OSD will not be displayed on the TV.
The OSD may not be displayed depending on the input signal even
if "On" is selected. If the operation screen is not displayed, change
the resolution of the connected device.
Screen Saver
Default Value: 3 minutes
Set the time to start the screen saver. Select a value from "3 minutes",
"5 minutes", "10 minutes" and "Off".
HDMI Input
You can change input assignment between the input selectors and HDMI IN
jacks.
BD/DVD
Default Value: HDMI 1 (HDCP 2.2)