Input Setup - Onkyo TX-NR1000 Instruction Manual

Input Setup

Items described here are set when you press the input source buttons.
The TX-NR1000/TX-NR5000E is equipped with several types of jacks in addition to the standard audio and video jacks,
and multiple jacks are provided for each type. You may freely assign input sources such as CD, PHONO, TUNER, TAPE
1, TAPE 2, and VIDEO 1-7 to these jacks.
Moreover, you can preset a listening mode, specify names for display, adjust audio delays, correct the difference in the
volume level from other input sources, and set the 12V trigger.
In particular, please be careful when setting the input jacks. Please properly specify settings for correct selection of
pictures and audio to be played by referring to the information you wrote down in the Your System Setting booklet.
In the case of NET AUDIO, you can specify settings for the server (See page 95).
Settings defaults are as follows:
OSD Indication
Analog Audio Multichannel Digital Audio
Name of Terminal AUDIO IN
to be Set
NET AUDIO No
CD 1
PHONO Phono
TUNER No
TAPE 1 2
TAPE 2 3
DVD 4
VIDEO 1 5
VIDEO 2 6
VIDEO 3 7
VIDEO 4 8
VIDEO 5 9
VIDEO 6 No
VIDEO 7 Front (fixed)
Note: Defaults may differ depending on your region.
Audio Assign
i.LINK
MULTI-CH DIGITAL IN iLINK
IN
No No No
2 Opt 2 No
No No No
No No No
No Opt 3 No
No Coax 1 No
1 Opt 1 No
No Coax 2 No
No Coax 3 No
No Opt 4 No
No Opt 5 No
No Coax 4 No
No Coax 5 No
No Front Opt No
(fixed)
Video Assign
Composite S-Video Component
Video Video
VIDEO IN S VIDEO IN COMPONENT
VIDEO IN
Last Last Last
Last Last Last
Last Last Last
Last Last Last
Last Last Last
Last Last Last
1 1 RCA 1
2 2 RCA 2
3 3 RCA 3
4 4 RCA 4/BNC
5 No No
6 No No
No 5 No
Front (fixed) Front (fixed) No
HDMI
HDMI IN
Last
Last
Last
Last
Last
Last
HDMI 1
HDMI 2
Video
Video
Video
Video
Video
Video
93