Supplied Accessories; Connecting The Supplied Power Cord - Onkyo TX-NR1000 Instruction Manual

Supplied Accessories

Make sure you have the following accessories:
Remote Controller & Three Batteries (AA/R6)
AM Loop Antenna (not supplied with USA and Cana-
dian models)
Indoor FM antenna (not supplied with USA and
Canadian models)
(connector type varies from country to country)
1
Speaker Cable
Speaker Labels
Terminal Wrench
A wrench to screw/unscrew the speaker terminal cap.
Power Plug adapter
Only supplied in certain countries. Use this adapter if
your AC outlet does not match the plug on the
TX-NR1000/TX-NR5000E's power cord (adapter varies
from country to country).
8
2
3
Power Cord

Connecting the Supplied Power Cord

Plug the supplied power cord into this AC INLET.
• Do not use a power cord other than the one supplied
with the TX-NR1000/TX-NR5000E. The power cord
supplied is designed for use with the TX-NR1000/
TX-NR5000E and should not be used with any other
device.
• Never have the power cord disconnected from the
TX-NR1000/TX-NR5000E while the other end is
plugged into the wall outlet. Doing so may cause an
electric shock. Always connect by plugging into the
wall outlet last and disconnect by unplugging from
the wall outlet first.
AC INLET
DO NOT connect the
power cord at this time.
Power Cord
(supplied)