Advanced Operation Using The Multichannel Input; Advanced; Input Setup Input:dvd - Onkyo TX-NR901 Instruction Manual

Advanced Operation
Using the Multichannel Input
This section explains how to use the multichannel analog
input. Connecting the 5.1 or 7.1 analog outputs of your
DVD player to the multichannel analog input allows you
to enjoy DVD-Audio discs and Super Audio CDs, pro-
viding that your DVD player supports those formats. See
page 29 for connection details.
Setting the Multichannel Input
Before using the multichannel input, you need to assign
it to an input source. By default, it's assigned to the DVD
input source, as shown in the following table, so if you
connect a DVD player to the multichannel input, no fur-
ther settings are required.
Note:
• The Net-Tune input source cannot be set to Yes.
Input source Default setting
DVD
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
CD
PHONO
TUNER
TAPE
1 Press the [INPUT] button, and
INPUT
then roll the scroll wheel to select
the input source you want to set.
2
Press the scroll wheel, and then
press the [SETUP] button.
The main menu appears.
Yes
No
No
No
No
No
No
No
No
No
3
Use the Up/Down [
tons to select "2. Input Setup,"
and then press the [ENTER] but-
ENTER
ton.
The Input Setup menu appears.
ENTER
4
Use the Up/Down [
tons to select "2. Multichannel
Setup," and then press the
ENTER
[ENTER] button.
The Multichannel Setup menu appears.
Advanced Menu
ENTER
2.Input Setup
2-2.Multichannel Setup
a.Multichannel
5
Use the Up/Down [
tons to select "a. Multichannel,"
ENTER
and then use the Left/Right [
[ ] buttons to select:
Yes: Assigned to multichannel
analog input.
No: Not assigned to multichannel
analog input.
6 Press the [SETUP] button.
The setup menu closes.
Note:
• This procedure can also be performed by using the
TX-NR901's [SETUP] button, [
buttons, and [ENTER] button.
]/[ ] but-
]/[ ] but-
Input:DVD
Input:DVD
:Yes
Quit:|SETUP|
]/[ ] but-
]/
]/[ ]/[ ]/[ ]
63