Front Panel Display - Onkyo TX-NR1000 Instruction Manual

Index Parts and Facilities —Continued
B
RS 232
This port is for connecting the TX-NR1000/
TX-NR5000E to home automation and external
controllers.
C
PRE OUT A/B
To use the TX-NR1000/TX-NR5000E as a
preamplifier, connect a power amplifier to this jack.
D
SPEAKERS A/B
These terminals are for connecting the speakers.
Two sets of home theater connections are available
(simultaneous playback of different sources in each
of two home theaters is not supported).
Depending on your system, various speaker
connections will be available. For example, you can
use the surround back speakers for playback in a
different room.
E
AC OUTLET
The TX-NR1000/TX-NR5000E is equipped with
AC mains outlets for connecting the power cords
from other devices so that their power is supplied
through the TX-NR1000/TX-NR5000E. By doing
this, you can leave the connected device turned on
and have the [STANDBY/ON] button on the
TX-NR1000/TX-NR5000E turn on and off the

Front Panel Display

A
Listening mode or input format indicators
One of these indicators lights to show the format of
the current input source. In addition, one of the
listening mode indicators lights to indicate the
current listening mode.
B
Multifunction display
During normal operation, shows the current input
source. When the FM or AM input is selected,
shows the frequency and preset number. When the
[DISPLAY] button is pressed, shows the listening
mode and input source format.
C
Audio input signal path indicators
Shows from which terminal the audio input signal is
coming.
D
MAIN A/B indicators
Indicates which room is currently in use.
E
SLEEP indicator
Lights when the sleep timer is turned on.
F
Tuning indicators
AUTO indicator
Lights when receiving FM broadcasts in the stereo
mode. Turns off when placed into the monaural mode.
device together with the TX-NR1000/
TX-NR5000E.
The shape, number, and total capacity of the AC
outlets may differ depending on the area of
purchase.
Caution:
Make sure that the total capacity of the components
connected to the TX-NR1000/TX-NR5000E does
not exceed the capacity that is printed on the rear
panel (e.g., AC 120V - 60Hz SWITCHED 120W
1A MAX.).
F
AC INLET
This connector is for connecting the supplied power
cord.
G
IR IN/OUT
These connectors are for connecting the remote
sensor of a multiroom kit (sold separately).
The connectors are provided for main room, Zone 2,
and Zone 3.
H
12V TRIGGER OUT
These connectors are used to connect to the 12V
TRIGGER IN terminal of a component. Available
connectors are one with maximum current capacity
of 200 mA and four with 100 mA.
RDS indicator (European models only)
Lights when an RDS station is being received.
TUNED indicator
Lights when a radio station is being received.
MEMORY indicator
Lights when the [MEMORY] button is pressed to
preset a radio station.
FM STEREO indicator
Lights when an FM broadcast station is being
received in stereo. Turns off when placed into the
monaural mode.
G
Program format display
When the input source is DVD video, Super Audio
CD, or compressed digital audio signal such as
Dolby Digital and DTS, the channels corresponding
to the input source light.
H
Volume display
Shows the volume level.
I
Video input signal path indicators
Shows from which terminal the video input signal is
coming.
15