Network Scan/Fax/Network Fax Operations
Host Address
%
Enter the host address for the destination computer in the format of a host name, IPv4 address or IPv6
address.
–
For a host name, enter 255 characters or less.
!
Detail
When the input format is switched to the IP address input mode after the host name was entered, the
host name is cleared.
If [Host Name Input] is touched after the IP address was entered, the entered IP address is cleared.
Enter the host name and file path in uppercase letters.
File Path
%
Enter the path to the saved file using up to 255 characters from the touch panel.
!
Detail
If the computers or workgroups on the network (subnet) that this machine belongs to are more than the
numbers listed below, browsing over the network may not be performed correctly.
Workgroup: 128
Computer: 128
Reference
The structure of the folders on the destination computer can be checked. This function can be used to directly
check the destination folder.
bizhub C203/C253/C353
6
6-103