Konica Minolta BIZHUB C203 User Manual page 91

Copy Operations
Setting
Center Staple/Fold
Output Tray
Staple
Punch
The following procedures describe how to select Finishing settings.
Reminder
The Staple settings are available only if the optional finisher is installed.
The Punch settings are available only if the punch kit is installed on the optional finisher.
Available Finishing Settings
Sort
Group
Offset
Staple
Punch
Center Staple & Fold
Half-Fold
Select Output Tray
o: Possible
e: Not possible
bizhub C203/C253/C353
Description
Select this setting to fold copies. The copies
can also be bound with staples at the same
time.
The "Center Staple & Fold" setting can be
used if the saddle stitcher is installed on op-
tional finisher.
Select the output tray where the finished copies are to be fed.
Select one of these settings to bind the cop-
ies with a staple in the corner or with two
staples.
Holes are punched (4 holes) in the copies for
filing them.
Finisher Finisher
+ Punch kit
o o
o o
o o
o o
e o
e e
e e
o o
Finisher Finisher
+ Punch kit + Punch kit
+ Saddle + Mailbin
stitcher
o o
o o
o o
o o
o o
o e
o e
o o
3
Separator
o
o
o
e
e
e
e
o
3-53