Konica Minolta BIZHUB C203 User Manual page 111

Copy Operations
4
Press the [Check Program Settings] key.
– The copy settings cannot be changed from the Check Job Settings screens.
The Check Job Settings screen appears.
There are six Check Job Settings screens. The number to the right of the screen title indicates the
number of the currently displayed screen.
To display the previous screen, touch [
5
Check the copy settings registered with the selected copy program.
6
Touch [Close].
The Recall Copy Program screen appears again.
7
Again touch the button for the copy program registered with the copy settings to be recalled.
– If [OK] is touched with no copy program selected, the Basic screen appears again without a copy
program being recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen appears again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.
Note
To stop recalling a copy program, press the [Reset] key or the [Mode Memory] key or touch [Cancel].
bizhub C203/C253/C353
Back]. To display the next screen, touch [Forward
3
].
3-73