Konica Minolta BIZHUB C203 User Manual page 97

Copy Operations
– Select the stapling position, and then touch [OK].
– When the "2 Position" Staple setting is selected.
– When the "Corner" Staple setting is selected.
– Touch [Auto] to automatically determine the stapling position according to the orientation of the
loaded original. If the original length is 297 mm or less, the long side of the paper is stapled. If the
original length is more than 297 mm, the short side of the paper is stapled.
– If "Auto" is selected for the stapling position, load the original with the top toward the back of the
machine. If the original is loaded in any other orientation, the stapling will not be correctly
positioned.
– If "Auto" is selected, the stapling position is set at the top or at the left.
– To cancel the setting and select the default, press the [Reset] key.
4
If desired, touch [Original Direction], and then select the setting appropriate for the original.
5
Touch [OK].
The Basic screen appears again.
bizhub C203/C253/C353
3
3-59