Setup; Checking Fluid Levels - Toro Workman HD 07369 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
Media and Additional Parts
Description
Operator's Manual (Vehicle)
Parts Catalog
Operator Training Material
Note: Determine the left and right side of the machine from the normal operating position.
1

Checking Fluid Levels

No Parts Required
Procedure
1. Check the engine oil level before and after the engine
has been run for a short time, refer to Checking the
Engine Oil Level in Operation.
2. Check the transaxle/hydraulic fluid level before
the engine is first started, refer to Checking the
Transaxle/Hydraulic Fluid Level in Operation.
3. Check the brake fluid level before the engine is first
started, refer to Checking the Brake Fluid Level in
Operation.
Description
No parts required
Qty.
–
Qty.
1 Read before operating machine
1 Use to reference part numbers
1
View before operating machine
13
Use
Check the engine oil, transaxle/hydraulic
fluid, and brake fluid levels
Use