Maintenance; Recommended Maintenance Schedule(S) - Toro Workman HD 07369 Operator's Manual

Maintenance

Determine the left and right sides of the machine from
the normal operating position.
Only qualified and authorized personnel shall be permitted to maintain, repair, adjust, or inspect
the vehicle.
Avoid fire hazards and have fire protection equipment present in the work area. Do not use an open
flame to check level or leakage of fuel, battery electrolyte, or coolant. Do not use open pans of fuel
or flammable cleaning fluids for cleaning parts.
If you leave the key in the ignition switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 2 hours
After the first 8 hours
After the first 10 hours
After the first 50 hours
Before each use or daily
Every 50 hours
Every 100 hours
Maintenance Procedure
• Torque the front and rear wheel nuts.
• Check the condition and tension of the pump drive belt.
• Torque the front and rear wheel nuts.
• Check the adjustment of the shift cables.
• Check the adjustment of the parking brake.
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Check engine oil level.
• Check the transaxle/hydraulic fluid level.
• Check the tire pressure.
• Check the brake fluid level.
• Check the operation of the interlock system.
• Clean and oil the air cleaner foam pre-cleaner. (Every 25 hours if operating
conditions are extremely dusty or sandy)
• Inspect the air cleaner paper element.
• Check the battery fluid level. (Every 30 days if in storage)
• Check the battery cable connections.
• Grease all bearings and bushings. (Lubricate more frequently in heavy duty
applications)
• Change the engine oil and filter.
• Check the condition of the tires.
• Removing debris from the engine cooling system. (Clean more frequently in dirty
conditions.)
30