Toro Workman HD 07369 Operator's Manual page 49

1. Jumper hoses
5. Keep all bystanders away from the vehicles.
6. Start the second vehicle and move the lift lever to
the raise position which will raise the disabled box.
7. Move the hydraulic lift lever to the neutral position
and engage the lift lever lock.
8. Install the bed safety support onto the extended lift
cylinder. Refer to Using the Bed Safety Support.
Note: With both the vehicles turned off, move
the lift lever back and forth to remove the system
pressure and ease the disconnection of the quick
couplers.
9. After completing the operation, remove the jumper
hoses and connect the hydraulic hoses to both
vehicles.
Important: Check the hydraulic fluid levels, in
both vehicles, before resuming operation.
Figure 64
49