Changing The Engine Oil - Toro 74933 Operator's Manual

2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 46).
A
C
F
H
Figure 46
B
D
E
G
I J
G027659

Changing the Engine Oil

Service Interval: After the first 8 hours
Every 100 hours more often in dirty or dusty
conditions.
Note: Dispose of the used oil at a recycling center.
1. Park the machine so that the rear is slightly lower than
the front to ensure that the oil drains completely.
2. Disengage the PTO, move the motion-control levers to
G021395
the
NEUTRAL
3. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
4. Drain the engine oil
38
- position, and set the parking brake.
LOCK
(Figure 47).
Figure 47
G021395