Toro 74933 Operator's Manual page 39

5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the full mark
A
C
E
6. Start the engine and drive to a flat area. Check the oil
level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours
Note: Change the engine oil filter more frequently when
operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to
Engine Oil (page 38).
2. Change the engine-oil filter
(Figure 48).
B
D
F
g027660
Figure 48
Changing the
(Figure 49).
Note: Ensure that the oil filter gasket touches the
engine and then turn it an extra 3/4 turn.
3. Fill the crankcase with the proper type of new oil; refer
to Servicing the Engine Oil (page
39
Figure 49
37).
G021395