Toro 74933 Operator's Manual page 12

1. Check the hydraulic fluid every 50 operating hours.
2. Read the Operator's Manual for information on lubricating
the machine.
1. Warning—read the Operator's Manual; do not operate the
machine unless you are trained; wear hearing protection.
2. Cutting and pinching hazard—keep hands and feet away from
moving parts; keep all guards and shields in place.
3. Thrown object hazard—keep bystanders away.
125–9383
3. Check the tire pressure every 50 operating hours.
4. Read the Operator's Manual before servicing or performing
maintenance.
132-0871
4. Ramp hazard—when loading onto a trailer, do not use dual
ramps; only use a singular ramp wide enough for the machine
and that has an incline less than 15 degrees; back up the
ramp (in reverse) and drive forward off the ramp.
5. Bodily harm hazard—look behind you when mowing in
reverse.
6. Tipping hazard on slopes—do not use on slopes near open
water; do not use on slopes greater than 15 degrees.
12