Driving Forward Or Backward - Toro 74933 Operator's Manual

Driving Forward or Backward

The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the F position for best performance. Always operate in
AST
the - position when mowing.
FULL THROTTLE
CAUTION
Machine can spin very rapidly. Operator may lose
control of machine and cause personal injury or
damage to machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Using the Motion-Control Levers
Figure 19
1. Motion-control
lever—neutral-lock
position
2. Center, unlocked position
3. Forward
4. Backward
5. Front of machine
Driving Forward
Note: The engine will shut off when you move the
traction-control levers with the parking brake engaged.
To stop the machine, pull the motion-control levers to the
position.
NEUTRAL
1. Release the parking brake; refer to
Parking Brake (page
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion-control levers
forward (Figure
23
Releasing the
20).
20).
Figure 20
G008952