Optional Oil Cooler; Installing The Grass Basket Hooks - Toro 04520 Operator's Manual

WARNING
Battery terminals or metal tools could short
against metal tractor components causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
• When removing or installing the battery, do
not allow the battery terminals to touch any
metal parts of the tractor.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
tractor.
WARNING
Failure to correctly activate the battery may
result in battery gassing and/or premature
battery failure.
7. Place the battery on the battery tray and secure it with
the battery clamp and fasterners removed previously.
8. Install the positive cable (red) to the positive (+)
terminal and then the negative cable (black) to the
negative (–) terminal of the battery and secure them
with the bolts and nuts (Figure 7). Slide the rubber
boot over the positive terminal to prevent a possible
short from occurring.
WARNING
Incorrect battery cable routing could damage the
tractor and cables causing sparks. Sparks can cause
the battery gasses to explode, resulting in personal
injury.
• Always disconnect the negative (black) battery
cable before disconnecting the positive (red)
cable.
• Always connect the positive (red) battery cable
before connecting the negative (black) cable.
1. Negative (-)
2. Positive (+)
5

Optional Oil Cooler

No Parts Required
Procedure
If you are operating the machine in hot climates, where
ambient temperatures are above 85 degrees F (29
degrees C), or using it for heavy-duty use (mowing other
than greens, such as fairways or verticutting), install a
Hydraulic Oil Cooler Kit, Part No. 117-9314, to the
machine.
6
Installing the Grass Basket
Hooks
Parts needed for this procedure:
6 Grass basket hook
12 Flange bolts
Procedure
Install the 6 grass basket hooks onto the ends of the
suspension arm bars using 12 flange bolts (Figure 8).
16
Figure 7