Dashboard Switches; Instrument Cluster - Toro 07390 Workman HDX-Auto Operator's Manual

1. Speed-range lever
2. T (transport range)
3. D (high range)

Dashboard Switches

1. High flow hydraulics switch
(TC models only)
2. Light switch
3. Differential switch
4. Horn button (TC models
only)
5. Ignition switch
High Flow Hydraulics Switch (TC models only)
Push the switch down to start the high flow hydraulics and
push the switch up to shut off the hydraulics
Note: You must set the high flow hydraulics switch to the
Off position in order to start the engine.
Figure 12
4. C (mid-high range)
5. B (mid-low range)
6. A (low range)
Figure 13
6. Off
7. On
8. Start
9. Power point
(Figure
Light Switch
Push the light switch down to toggle the headlights on or push
the light switch up to toggle the headlights off
Differential-lock Switch
The differential-lock switch allows you to lock the rear axle
for increased traction. Push the differential-lock switch
(Figure 13) to toggle the differential lock on or off.
Note: You may lock and unlock the differential while the
vehicle is in motion.
Horn Button (TC models only)
Pressing the horn button activates the horn
Ignition Switch
Use the ignition switch
engine. It has 3 positions: Off, Run, and Start. Rotate the key
clockwise to the Start position to engage the starter motor.
Release the key when the engine starts. The key will move
automatically to the On position. To shut the engine off,
rotate the key counterclockwise to the Off position.
Power Point
Use the power point socket
12-volt electrical accessories.

Instrument Cluster

1. Tachometer
2. Hour meter
3. Speedometer
4. Fuel gauge
Tachometer
13). The tachometer displays the speed of the engine
Note: The white triangle indicates the desired engine speed
for 540 rpm PTO operation.
17
(Figure
(Figure
(Figure 13) to start and stop the
(Figure 13) to power optional
Figure 14
5. Charge-indicator light
6. Check-engine light
7. Low-oil pressure light
8. Coolant-temperature
gauge
(Figure
13).
13).
14).